top of page
water tap 01.jpg
Logo Whole House RO System 05.jpg
water tap 01_edited_edited_edited.jpg
pictures line.jpg

You can Direct Line Connect Reverse Osmosis Treated Water to every tap, shower, tub, sink, toilet, dishwasher, hose bib, swimming pool make up water, fish tank, patio misting system, evaporative coolers, ice maker, or  whatever you want...

Installation Information

water tap 01.jpg

The WHRO Water Treatment System is designed for both RESIDENTIAL and COMMERCIAL installations.

whro picture 06.jpg
whro picture 16.jpg
TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

The WHRO System is designed to treat water supplied by either a MUNICIPAL or a PRIVATE source.

water tank 01.jpg
well pump 01.jpg
TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

If your source water contains IRON and MANGANES it is necessary to refer to the

PRE-TREATMENT for IRON & MANGANES section.

rust stained tub 01.jpg
clack valve 03.jpg

Tap Here to go to the 

PRE-TREATMENT
for
IRON & MANGANES
Section 

TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

If you have concerns or issues associated with BIOLOGICAL FOWLING it is necessary to refer to the

PRE-TREATEMENT for BIOLOGICAL FOWLING Section.

micro bio 01.jpg
UV Light 03.jpg

Tap Here to go to the 

PRE-TREATMENT
for
BIOLOGICAL FOWLING
Section 

TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

The WHRO Water Treatment System is engineered to produce treated water at production rates ranging from 300 gallons per day (0.21gpm) to 1,400 gallons per day (1.04 gpm)

water flow meter 01.jpg
water flowing 02.jpg
TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

The Water Storage Tank is available in 100, 200, or 300 gallons capacity. The tank can be doubled for greater storage capacities. Larger (special orders) tanks are available upon request and price quotes.

whro picture 11_edited.jpg
whro picture 21.jpg
plastic water tank pic 01.jpg
TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

The WHRO System is designed to maintains a water distribution pressure at 60 psi with a flow rate of 25 gallons per minute.

0927211405a_HDR.jpg
shower lady 01_edited.jpg
TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

The WHRO System is designed to install in the exact same place as a standard water softener. The installation requirements are exactly the same.

water softener loop 01_edited.jpg
water softener installation 01.jpg
TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

The WHRO Water Treatment System requires a standard 110V, 20amp electrical receptacle power supply.

circuit breaker 20 amp 01.jpg
electrical receptacle 01_edited.jpg
TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

The water inlet connection and water outlet connections are 3/4" male pipe thread.

It is designed to be installed using  standard water flex connectors.

water flex connectors 01_edited.png
in and out ports on the whro 01.jpg
TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

The drain connection is a 3/8" quick connect connection.  The drain line is pressure feed and can run up hill if needed.

tubing john guest roll 01.jpg
fitting.jpg
TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

This simple, high quality and proven design has made these systems uncomplicated, cost effective and reliable to operate for many years to come.

Walrus pump 02.png
TapThatWaterCo-h1_edited.jpg
water tap 01.jpg

The WHRO Systems arrive assembled and ready for service.

They are fully tested, preserved and sanitized.

whro picture 21.jpg
whro picture 18_edited.jpg
0723211621_HDR.jpg
TapThatWaterCo-h1_edited.jpg
water wave 01.jpg

The Whole House Reverse Osmosis Water Treatment System

squating kid pointing color_edited_edited.png
Logo Whole House RO System 05.jpg
water bottles.jpg
ist1_7255523-little-girl-in-bath[1].jpg
Return to the Previous Page

Bottled Quality Water is not just for drinking anymore...

bottom of page